Skip to main content

Wolkswagen ID3 🚗

Here you will find practical information about using the Wolkswagen ID3.

How to start the car?

Press the break pedal - the ID3 will automatically power on.

The dashboard will show ready, meaning the car is active and ready to drive.

How to select a gear?

In the ID.3, the gear selector is not in the center console.

It is a small rotating lever on the right side of the steering wheel.

How to change gear:

  1. Make sure the ignition is on (press the break to wake the car)

  2. Press the brake pedal.

  3. Rotate the gear selector:

    • Clockwise → Drive (D)

    • Counter-clockwise → Reverse (R)

    • Light press to center → Neutral (N)

    • Button on the side → Park (P)

How to end a ride in Wolkswagen ID3?

  1. Bring the car to a complete stop and press the brake pedal.

  2. Push the Park button (on the end of the gear selector)

  3. Exit the car and end the trip in the app.

High Beams and Light Control

The light and high-beam controls are on the left stalk next to the steering wheel.

  • Push the lever front to turn high beams ON.

  • Push the lever back to turn high beams OFF.

  • A blue indicator light appears on the dashboard when high beams are active.

Turn Signals (Indicators)

Turn signals are on the same left-hand stalk as the lights.

  • Up = right turn

  • Down = left turn

Wipers & washer controls (left stalk)

The ID.3 uses the left-side stalk to control the windscreen wipers.

Controls typically include:

  • Intermittent wipe

  • Low and high-speed wiping

  • Rain-sensor mode (if equipped)

  • Washer spray — press the button on the end of the stalk

Boot / Trunk - Capacity & Dimensions

The ID.3 has a practical, easy-to-access rear boot.

  • Capacity: approx. 385 liters

  • Rear seats folded: up to 1,267 liters

  • Fits everyday items like groceries, luggage, strollers, or sports gear.

Did this answer your question?